正规的彩票软件

服务热线

Welcome to the official website of Wuxi Fuchen Door Industry Technology Co., Ltd.!

0510-83787884

Service Hotline:

福臣门业

Wuxi Fuchen Door Industry Technology Co., Ltd.

电话

Landline: 0510-83787884

电话

Mobile: 15861688000, 13915272097

地址

Address: No. 128, Furong Middle Third Road, Xishan Economic and Technological Development Zone, Wuxi City

苏ICP备14024699号 Copyright © Wuxi Fuchen Door Industry Technology Co., Ltd. 苏 ICP 备 14024699 号
| 无锡 Website Construction: www.300.cn | Wuxi

福臣门业
  • Home banner3

    Home banner3

  • Home banner2

    Home banner2

  • Home banner1

    Home banner1

产品系列

fire-proof door

Yellow steel fire door

fire-proof door

fire-proof door

fire-proof door

fire-proof door

fire-proof door

fire-proof door

关于福臣

Wuxi Fuchen Door Industry Technology Co., Ltd. is located in the beautiful Taihu Lake Wuxi Economic and Technological Development Zone. It is a company engaged in the research and manufacture of various fire doors and windows, fire shutter doors, stainless steel doors, clean doors, explosion-proof doors, roll shutter doors, fast shutter doors, folding doors. , Sliding doors, lift doors, metal fast-rolling doors, energy-saving fire-resistant windows,
Fire-resistant glass and other modern doors and windows, accessories.

公司简介
厂房厂貌
资质荣誉
联系我们
Installation and installation requirements of fire shutter doors
news

Installation and installation requirements of fire shutter doors

Fire shutter doors are widely used in shopping malls, commercial buildings and underground garages, but not to mention the specific installation steps, even fire shutter doors may not be explained in detail. The fire shutter doors are installed step by step in detail: Step 1: Install the guide rail 1. Determine the installation position of the guide rail on both sides of the fire shutter door, use the hammer wire to release the guide rail reference line, and release the rail connector fixing bolt cross line, and the guide rail should not exceed 75cm above the ceiling. 2. Use an impact drill to punch the connector to fix the expansion bolt holes on the wall column. The distance between the connectors must not be greater than 600mm, and the two ends are 100mm away from the rail opening.
2016-09-08
Development and change of fire shutter door in practical application
news

Development and change of fire shutter door in practical application

Fire shutter doors are widely used in fire doors. They are developed from a single-piece fire shutter to a two-piece composite type, and a dual-track double- curtain inorganic cloth type. In continuous research and exploration. The early steel fire-resistant rolling shutter doors were single-plate type, and the curtain surface was generally made of strip-shaped curtain sheets made by cutting and rolling a thin steel plate with a thickness of 0.5 to 1.5 mm. The veneer steel fireproof rolling curtain surface has the advantages of simple structure, high strength, wind pressure resistance, anti-theft, good plasticity, convenient processing, installation and use, etc., but the fire resistance and heat insulation performance are poor.
2016-09-08
Technical requirements for fire windows
news

Technical requirements for fire windows

I. Technical requirements: 1. Materials and accessories (1) The window frame frame adopts a steel frame or wooden frame with a certain strength to ensure the integrity and stability of components. (2) Galvanized steel or stainless steel can be used for steel frame and bead. The material selection standard complies with Article 5.1 of GB12955 "General Technical Conditions for Steel Fire Doors". (3) The material selection standards for wooden frames and battens shall comply with the provisions of Article 5.1.1 of GB14101 "General Technical Conditions for Wooden Fire Doors". (4) Non-combustible materials shall be used as the filling material inside the steel and wooden frames. (5) Fireproof glass is optional
2016-08-22
新闻资讯
飞艇微信群赛车群公众号 尊尼彩票登录 手机捕鱼游戏 大发体育 真人梭哈提现棋牌 沙巴体育 棋牌游戏下载 十大捕鱼技巧 网络棋牌游戏 单机版游戏